Heatscope Spot 2.8kW Radiant Mounted Infrared Outdoor Heater

Modern SPOT 2800w Ceramic Wall or Ceiling Mounted Electric Infrared Outdoor Heater by Heatscope 

SPOT by Heatscope is a convenient, eco-friendly and space-saving electric infrared heater with an award-winning modern design to pleasantly merge with most decor. Ideal for both indoor and outdoor heating, producing natural infrared heat and rated the most efficient electric radiant heater in the UK market, the SPOT by Heatscope will not disappoint.

Producing a soft orange glow, these SPOT outdoor infrared heaters are only 30%-40% of the light output in comparison to traditional radiant heaters, meaning you can enjoy the comfortable, ambient modest light with no distractions. With the ability to produce heat almost instantly (less than 15 seconds), these midwave radiant heaters are ideal for providing warming heat to outdoor areas such as on balconies and partially open patios.

Available in Black / White

You can choose to have the SPOT 2800W electric infrared heater controlled in 3 ways: manual mode, IR remote controlled or Dual Wifi Smart Switch. 

These SPOT radiant outdoor heaters can be installed in 3 different configurations:

Manual - The heater will be hardwired to your fuse box. To turn the appliance On or Off you will need to install an isolation switch. (2 gang switch not included)

Key points:

1. This will allow you to control the heater via a permanent wall switch
2. Each Heatscope unit will need it’s own Dual Isolation Switch; you cannot control multiple units from the same switch
3. There will be no WiFi signal or smart device access with this type of installation

IR Remote control (wireless mode) - Control Heatscope heaters with the infrared Remote Control. Switch on and off, and change power levels of your heaters. The Heatscope Heater will be hardwired to a ZigBee Dual WiFi Smart Switch, and this unit will be in line with your fuse box. 

Key points:

1. Connect the heater to your WiFi network via the eWelink app
2. On & Off Scheduling via eWelink app
3. Control the heater output: 0%, 50% and 100%
4. Control the heater using voice assistants
5. This switch is 2.4GHz wifi compatible only
6. Operate multiple heaters (1 smart WiFi switch per heater)

Dual WiFi Smart Switch (wireless mode) -  It is installed inline between the fuse box and the Heatscope heater, and it allows the appliance to receive commands via a smartphone. The Heatscope Heater will be hardwired to a ZigBee Dual WiFi Smart Switch, and this unit will be in line with your fuse box. 

Key points:

1. The Dual WiFi Smart Switch will connect the Heatscope heater to your WiFi network via the eWelink App. This will allow you to control the heater via a smart device (smartphone, tablet etc).
2. Each smart device will need the eWelink App installed to be able to control the heater
3. By adding the ZigBee Bridge, it will allow you to include additional accessories such as the Wireless Switch (Remote Control) and/or a Motion Sensor to control your Heatscope Heater
4. The Wireless Switch is a freestanding unit that is very easy to operate
5. The Motion Sensor will detect motion immediately and if no motion is detected for 150 seconds after becoming “active” it will send a “no motion detected” signal

Key Features

Weather-Resistant

The PURE electric outdoor heater can withstand general all-weather conditions so no protective shield or any additional protection is required. All models are certified with an IP rating for protection against dust, splash-water, and wind.

Easy Installation

Dedicated wall & ceiling mounts (which only need two screws to be securely attached), enable subtle placement anywhere.

Adjustable

Easily and accurately change the angle via the swivel joint mount for precise heating.

Easy to use

Single ON/OFF switch, plus two adjustable output levels. Can also be integrated with Smart Home Systems – perfect for the connected home.

Eco-Friendly

PURE converts over 90% of input energy directly into radiant heat and operates at a smarter cost per hour. No greenhouse gases or unpleasant odours are emitted, and they don’t require ventilation or a flue. 

Specifications

Efficiency

 HEATSCOPE® infrared heaters must be installed and executed only by an authorized expert / professional electrician.

Accessories Included

Mounting parts

Additional accessories (Optional)

Dual fixing brackets (Install two heaters in one mounting system)

100mm, 300mm, 500mm Extension Rods in White (Extend the reach on high ceiling installations)

100mm, 300mm, 500mm Extension Rods in Black

Spot 2800 Weathershield 3 Black / White

Spot 2800 Lift (unique lift system solution for flush ceiling installation)

Spot 2800 Lift Box, Spot 2800 Lift Frame (unique lift system solution)

ZigBee Bridge (smart home/space automation set up - enables you to remotely manage a selection of ZigBee devices and sensors.)

ZigBee Motion Sensor (an extra-handy smart device that can be placed anywhere in your home or commercial space to detect motion and trigger actions.)

ZigBee Wireless Switch (a mini portable remote control that can be placed strategically for quick and easy operation)