Filling your AB series burner
(Mix series fire pits, Pod series fire pits, Martini fire table, Manhattan fire table, Base series fire table and Ark fire pit table)
Filling your AB series burner could not be any easier or safer. Using the lighting rod, lift and remove the burner lid. Inserting the nozzle into the burner opening point, push the green button to safely empty the fuel into the burner and once the reservoir is full, this should automatically stop filling. Replace the cap on the nozzle once you can finished.
Lighting your AB series burner
(Mix series fire pits, Pod series fire pits, Martini fire table, Manhattan fire table, Base series fire table and Ark fire pit table)
Lighting your AB series burner could not be any easier or safer. Using the lighting rod, lift and remove the burner lid. Dip the end of the lighting rod into the burner in order to wet the tool with some fuel. Using the fire lighter, light the end of the rod and insert back into the burner to ignite the flame. To extinguish the flame, simply use the hook on the rod to place the stainless steel lid back onto the burner.
Cleaning your AB series burner
(Mix series fire pits, Pod series fire pits, Martini fire table, Manhattan fire table, Base series fire table and Ark fire pit table)
Please do not attempt to clean your AB burner until it is off, cool and empty.
- Use a vacuum cleaner to remove any residue from the surface and inside the burner
- You can use stainless steel cleaner and a clean cloth to rub away any soot/grime. Rub gently in the direction of the steel structure to avoid scratching the surface
- Wash the surface of the burner with mild washing detergent to remove traces of the stainless steel cleaner cream and any remaining dirt.
- Wash the inside of the burner with warm soapy water and rinse thoroughly
- Ecosmart burners are also dishwasher friendly. Please place these upside down in your machine with the burner lid open.
- Allow to dry overnight before replacing the unit and re-filling your burner
Filling your XL series burner
(Cosmo fire table, Wharf fire table and Gin series fire tables)
Filling your XL series burner is simple, safe and quick. Simply insert the nozzle into the burner filling point, push the green button to safely empty the fuel into the burner and once the reservoir is full, this should automatically stop filling. Replace the cap on the nozzle once you can finished.
Lighting your XL series burner
(Cosmo fire table, Wharf fire table and Gin series fire tables)
Lighting your XL series burner is just as simple. Using the lighting rod, lift open the burner lid. Dip the end of the lighting rod into the burner in order to wet the tool with some fuel. Using the fire lighter, light the end of the rod and insert back into the burner to ignite the flame. To extinguish the flame, simply use the hook on the rod to close the stainless steel lid back onto the burner.
Cleaning your XL series burner
(Cosmo fire table, Wharf fire table and Gin series fire tables)
Please do not attempt to clean your XL burner until it is off, cool and empty.
- Use a vacuum cleaner to remove any residue from the surface and inside the burner
- You can use stainless steel cleaner and a clean cloth to rub away any soot/grime. Rub gently in the direction of the steel structure to avoid scratching the surface
- Wash the surface of the burner with mild washing detergent to remove traces of the stainless steel cleaner cream and any remaining dirt.
- Wash the inside of the burner with warm soapy water and rinse thoroughly
- Ecosmart burners are also dishwasher friendly. Please place these upside down in your machine with the burner lid open.
- Allow to dry overnight before replacing the unit and re-filling your burner
